Seamless steel pipe is made of perforated whole round steel, and the steel pipes without weld seam on the surface is called seamless steel pipes.
Seamless Steel Pipe/Tube (SMLS Pipe/Tube), Seamless Precision Pipe, MS Large Diameter Seamless Pipe
According to the type can be divided into Hydraulic Steel pipe,Boiler Steel Tube,Fluid Steel Pipe,Fire Steel Pipe,Line Steel Pipe,Structure Steel Tube and Mechanical Steel tube.
According to the production method, seamless steel pipes can be divided into hot-rolled seamless steel pipes, cold-rolled seamless steel pipe, cold-drawn seamless steel pipes, extruded seamless steel pipes, and pipe jacking.
According to the cross-sectional shape, the seamless steel pipe is divided into two types: round and special-shaped.
According to different uses, there are thick-walled seamless steel tube and thin-walled seamless steel tubes.
According to the surface treatment can be divided into Black Seamless Steel Pipe,Gi Seamless Steel Pipe.
The maximum diameter is 900mm and the minimum diameter is 4mm.
Seamless steel pipes are mainly used as petroleum geological drilling pipes, cracking pipes for petrochemicals, boiler pipes, bearing pipes and high-precision structural steel pipes for automobiles, tractors and aviation.
ASTM Standard for seamless steel pipe | ||
Executive Standard | Grade / Material | Product Name |
ASTM A53 | A, B | Black and Hot-Dipped Zinc-Coated Steel Pipes Welded and Seamless |
ASTM A106 | A, B | Seamless Carbon Steel for High Temperature Service |
ASTM A179 | Low Carbon Steel | Seamless Cold-Drawn Low-Carbon Steel Heat Exchanger and Condenser Tubes |
ASTM A192 | Low Carbon Steel | Seamless Carbon Steel Boiler Tubes for High Pressure |
ASTM A210 | A1, C | Seamless Medium-Carbon and Alloy Steel Boiler and Superheater Tubes |
ASTM A213 | T5, T11, T12, T22 TP 347H | Seamless Ferritic and Austenitic Alloy Steel Boiler, Superheater and Heat-Exchanger Tubes |
ASTM A333 | Gr.6 | Seamless and Welded Steel Pipe for Low-Temperature Service |
ASTM A335 | P9, P11, P22 | Seamless Ferritic Alloy Steel Pipe for High-Temperature Service |
ASTM A519 | 41,304,140 | Seamless Carbon and Alloy Steel for Mechanical Tubing |
ASTM A789 | Seamless Ferritic/Austenitic Stainless Steel Tubing for General Service | |
ASTM A312 | TP304/304L, TP316/316L | Seamless Steel Pipe for Stainless Materials |
API Standard for seamless steel pipe | ||
Executive Standard | Grade / Material | Product Name |
API Spec 5CT | J55, K55, N80, L80,C90, C95, T95, P110, M65 | Spectification for Casing and Tubing |
API Spec 5L PSL1 / PSL2 | A,B X42, X46, X52, X56, X60, X65,. X70 | Specification for Line Pipe |
DIN / EN Standard for seamless steel pipe | ||
Executive Standard | Grade / Material | Product Name |
DN 17175/EN10216-2 | ST35, ST45, ST52, 13CrMo44 | Seamless Steel Tube for Elevated Temperature |
DIN 2391/EN10305-1 | St35, St45, St52 | Cold Drawn Seamless Precision Pipe |
DIN 1629/EN10216-1 | St37, St45, St52 | Seamless Circular unalloyed Steel Tubes Subject to Special Requirments |
Billets and coils are delivered to the pipe mill ready to be made into carbon steel pipe. Depending on the capabilities of the pipe mill and the end use of the final product, the casts will be formed into pipe by means of four distinct different manufacturing.Seamless carbon steel pipe has, as its name implies, no longitudinal weld seam. It is, in essence, one solid homogeneous piece of steel. A solid billet is simply heated and then stretched over a series of mandrels until the pipe has achieved its desired diameter and wall thickness.
1. The main production process of hot-rolled seamless steel pipe (main inspection process):
Tube blank preparation and inspection→tube blank heating→piercing→tube rolling→steel reheating→fixed (reduced) diameter→heat treatment △→finished tube straightening→finishing→inspection (non-destructive, physical and chemical, Taiwan inspection)→warehousing
2. The main production process of cold-rolled (drawn) seamless steel pipes:
Billet preparation→pickling lubrication→cold rolling (drawing)→heat treatment→straightening→finishing→inspection
Our products aye widely used in water engineering,petrochemical industry,chemical industry,electric power industry,agricultural irrigation,urban construction.
Used for liquid conveying:water supply and drainage.For gas transport:gas,steam,liquefier petroleum gas.
For structural use:as pile pipe,as a bridge;Pipes for wharves,roads and building structures.
Q: Are you a manufacturer?
A: Yes , we are a seamless steel pipe manufacturer, We have own factory, which is located in Shandong,China. We have a leading power in producing and exporting hot rolled seamless steel pipe,cold rolled seamless steel pipe,cold drawn seamless steel pipe and alloy seamless steel pipe etc. We promise that we are what you are looking for.
Q:Can we visit your factory ?
A:Warmly welcome once we have your schedule we will pick you up .
Q: Do you have quality control?
A: Yes, we can accept BV, SGS third inspection .
Q: Can you arrange the shipment?
A: Sure, we have permanent freight forwarder who can gain the best price from most ship company and offer professional service.
Q: How long is your delivery time?
A: Generally it is 7-14 days if the goods are in stock. or it is 25-35 days if the goods are not in stock, it is according to quantity.
Q:How can we get the offer?
A:Please offer the specification of the product,such as material,size,shape,etc.So we can give the best offer.
Q:Can we get the some samples?Any charges?
A:Yes,you can get available samples in our stock.Free for real samples,but customers need to pay the freight cost.
Q: How do you make our business long-term and good relationship ?
A: 1.We keep good quality and competitive price to ensure our customers’ benefit.
2.We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.