Seamless steel pipe materials are divided into: 10, 20, 35, 45, 40Mn2, 45Mn2, 27SiMn, 20Cr, 40Cr, 20CrMo, 35CrMo, 38CrMoA1, 50CrV, 30CrMnSi ASTM A500-98.
Seamless steel pipe implementation standards:
1. Structural seamless pipes (GB/T8162-2008) are seamless steel pipes used for general structures and mechanical structures.
2. Seamless steel pipes for fluid transportation (GB/T8163-2008) are general seamless steel pipes used to transport fluids such as water, oil, and gas.
3. Seamless steel pipes for low and medium pressure boilers (GB3087-2008) are high-quality carbon structural steel used to manufacture superheated steam pipes and boiling water pipes for low and medium pressure boilers of various structures, as well as superheated steam pipes and arch brick pipes for locomotive boilers. Rolled and cold drawn (rolled) seamless steel pipes.
4. Seamless steel pipes for high-pressure boilers (GB5310-2008) are high-quality carbon steel, alloy steel and stainless heat-resistant steel seamless steel pipes used for the heating surfaces of water tube boilers with high pressures and above.
5. High-pressure seamless steel pipes for fertilizer equipment (GB6479-2000) are high-quality carbon structural steel and alloy steel seamless steel pipes suitable for chemical equipment and pipelines with working temperatures of -40~400℃ and working pressures of 10~30Ma.
6. Seamless steel pipes for petroleum cracking (GB9948-2006) are seamless steel pipes suitable for furnace tubes, heat exchangers and pipelines in petroleum refineries.
7. Steel pipes for geological drilling (YB235-70) are steel pipes used by geological departments for core drilling. They can be divided into drill pipes, drill collars, core pipes, casings and sedimentation pipes according to their uses.
8. Seamless steel pipe for diamond core drilling (GB3423-82) is a seamless steel pipe used for drill pipe, core rod and casing for diamond core drilling.
9. Oil drilling pipe (YB528-65) is a seamless steel pipe with internal or external thickening at both ends used for oil drilling. There are two types of steel pipes: wired and unthreaded. Threaded pipes are connected with joints, while non-threaded pipes are connected with tool joints by butt welding.
10. Carbon steel seamless steel pipes for ships (GB5213-85) are carbon steel seamless steel pipes used in manufacturing ships’ Class I pressure-resistant piping systems, Class II pressure-resistant piping systems, boilers and superheaters. The working temperature of the carbon steel seamless steel pipe wall does not exceed 450°C, and the working temperature of the alloy steel seamless steel pipe wall exceeds 450°C.
11. Seamless steel pipe for automobile half-shaft casing (GB3088-82) is a high-quality carbon structural steel and alloy structural steel hot-rolled seamless steel pipe used for manufacturing automobile half-shaft casings and drive axle housing shaft tubes.
12. High-pressure oil pipe for diesel engines (GB3093-2002) is a cold-drawn seamless steel pipe used to manufacture high-pressure pipes for diesel engine injection systems. 13. Precision inner diameter seamless steel pipe for hydraulic and pneumatic cylinders (GB8713-88) is a cold-drawn or cold-rolled precision seamless steel pipe with precise inner diameter for manufacturing hydraulic and pneumatic cylinders.
14. Cold-drawn or cold-rolled precision seamless steel pipe (GB3639-2000) is a cold-drawn or cold-rolled precision seamless steel pipe with high dimensional accuracy and good surface finish used in mechanical structures and hydraulic equipment. The use of precision seamless steel pipes to manufacture mechanical structures or hydraulic equipment can greatly save machining hours, improve material utilization, and at the same time help improve product quality.
15. Stainless steel seamless steel pipe for structural use (GB/T14975-2002) is a hot-rolled stainless steel made of corrosion-resistant pipes and structural parts and parts widely used in chemical, petroleum, textile, medical, food, machinery and other industries. extruded, expanded) and cold drawn (rolled) seamless steel pipes.
16. Stainless steel seamless steel pipes for fluid transportation (GB/T14976-2002) are hot-rolled (extruded, expanded) and cold-drawn (rolled) seamless steel pipes made of stainless steel used to transport fluids.
17. Special-shaped seamless steel pipe is the general term for seamless steel pipes with other cross-sectional shapes except round pipes. According to the different cross-sectional shapes and sizes of steel pipes, they can be divided into special-shaped seamless steel pipes with equal wall thickness (code-named D), special-shaped seamless steel pipes with unequal wall thickness (code-named BD), and variable-diameter special-shaped seamless steel pipes (code-named BJ). Special-shaped seamless steel pipes are widely used in various structural parts, tools and mechanical parts. Compared with round pipes, special-shaped pipes generally have a larger moment of inertia and section modulus, and have greater bending and torsion resistance, which can greatly reduce the weight of the structure and save steel.
18. Seamless steel pipes for low-temperature pipelines (GB/T18984-2003) are suitable for -45℃~-195℃ low-temperature pressure vessel pipes and low-temperature heat exchanger pipes.
Post time: Mar-05-2024