SS400 Structural Steel I Beams

Short Description:

SS400 Structural Steel I Beam.I-beam, also known as steel beam (Universal Beam), is a long strip of steel with an I-shaped cross-section. 

 

$490.00 – $590.00 / Ton

5 Ton (Min. Order)

Product Detail

Product Tags

SS400 Structural Steel I Beam.I Steel beam, also known as steel I beam (Universal Beam), is a long strip of steel with an I-shaped cross-section. I-beams are divided into ordinary I-beam and light I-beams. It is a section steel with an I-shaped section. I-beams are mainly divided into ordinary I-beams, light-duty I-beams and wide-flange I-beams. According to the height ratio of flange and web, it is divided into wide, medium and narrow wide flange I-beams. The first two are produced in size 10-60, that is, the corresponding height is 10 cm-60 cm. Lightweight I-beams have narrow flanges, thin webs and light weight for the same height. Wide flange I-beam, also known as H-beam, is characterized by two parallel legs and no slope on the inside of the legs. It belongs to economical section steel and is rolled on a four-high universal rolling mill, so it is also called “universal I-beam”.

Steel Pipe Coil Plate Sheet Tube

Product Name SS400 Structural Steel I Beam
Standard SS400
Material GB:Q235AASTM:A570 GR.AJIS:SS 400

DIN:S235JR

Technology Hot Rolled ,Cold Rolled
Chemical Composition C:≤0.17%Si:≤0.5%Mn:≤1.4%

P:≤0.035%

S:≤0.035%

Mechanical Property Yield Strength (MPa)≥:235Tensile  Strength (MPa):340-470Elongation %≥:24 

 

 

Tolerance Control with in the standard, OD:+/-1%, WT:+/-5%
Application Widely used in automobiles, motorcycles, gas springs, hydraulic machinery, construction machinery and refrigeration industry
Payment Terms 1.FOB 30%T/T,70% Before shipment
2.CIF 30% Pre-payment , Balance must be paid before  shipment
 3.Irrevocable 100% L/C at sight
Third Party Inspection SGS ,BV, MTC
Advantages 1.Short delivery time2.Quality assurance3.Competitive price,

4.Free Sample

Delivery Time Within 25 days after receipt of advance payment


Seamless Steel Pipe Coil Plate Sheet Tube

I-beams are mainly divided into ordinary I-beams, light-duty I-beams and wide-flange I-beams. The specification of the I-beam is expressed by the centimeter value of the waist width. For example, the 10-gauge I-beam has a waist width of 10cm. The types of I-beams include hot-rolled ordinary I-beams, light-duty I-beams and wide parallel-leg I-beams (H-beams). The waist width of the hot-rolled ordinary I-beam is 100~630mm, which is expressed as No.10~No.63, and the slope of the inner side wall of the leg is 1:6. The pass system for rolling I-beams includes straight rolling pass system, skew rolling pass system and mixed pass system.

Steel H Beam

Steel H Beams

Galvanized Steel Pipe Coil Plate Sheet Tube

1. After finishing and weighing, the billet is loaded into the walking furnace and heated to 1200-1250℃. Most of the walking furnaces use double insulated slide rails and axial flow burners, which can provide the best temperature control for different specifications of billets and save fuel.
2. After the billet is released from the furnace, it is first descaled with 1800MPa high-pressure water, and then sent to the billet mill for rolling. The billeting machine is generally a two-roll reversible rolling mill. It needs to be rolled about 7 to 13 passes on the billeting machine, and then the rolled piece is sent to the hot saw, which is only responsible for cutting off the unformed parts of the head and tail.
3. Finally, the rolled piece is sent to the universal roughing mill for rolling. Generally, it is sent to the universal finishing mill after several passes, and is rolled for one pass and finally formed. At this time, the head and tail are cut off again, and the rolled piece is cut into fixed length according to the order requirements and sent to the cooling bed for cooling.

Steel Pipes Coils Plates Sheets Tubes

Whether the I-beam is ordinary or light, due to the relatively high and narrow section size, the moment of inertia of the two main axes of the section is quite different, so it can only be directly used for bending in the plane of its web. member or form it into a lattice-type force-bearing member. It is not suitable for axial compression members or members that are perpendicular to the plane of the web and bending, which makes it very limited in the scope of application. I-beams are widely used in construction or other metal structures.
Ordinary I-beam and light-duty I-beam have relatively high and narrow cross-sectional dimensions, so the moment of inertia of the two main axes of the cross-section is quite different, which makes it very limited in the scope of application. The use of I-beam should be selected according to the requirements of the design drawings.
In the structural design, the selection of I-beam should be based on its mechanical properties, chemical properties, weldability, structural size, etc. to select a reasonable I-beam for use.
H Beams Steel

Steel Pipe Coil Plate Sheet Tubing

Steel H-Beam

 

Packaging
Standard seaworthy export packing, other types of packing can be customized as every requirement.
Shipping packaging
Bundled with firm steel straps, easy for loading and unloading.

 Steel Seamless Pipe Coil Plate Sheet Tube

Q: Are you a manufacturer?
A: Yes , we are a seamless steel pipe  manufacturer, We have own factory, which is located in Shandong,China. We have a leading power in producing and exporting various steel products. We promise that we are what you are looking for. 
Q:Can we visit your factory ?
A:Warmly welcome once we have your schedule we will pick you up .
Q: Do you have quality control?
A: Yes, we can accept BV, SGS third inspection .
Q: Can you arrange the shipment?
A: Sure, we have permanent freight forwarder who can gain the best price from most ship company and offer professional service.
Q: How long is your delivery time?
A: Generally it is 7-14 days if the goods are in stock. or it is 25-35 days if the goods are not in stock, it is according to quantity.
Q:How can we get the offer?
A:Please offer the specification of the product,such as material,size,shape,etc.So we can give the best offer.
Q:Can we get the some samples?Any charges?
A:Yes,you can get available samples in our stock.Free for real samples,but customers need to pay the freight cost.
Q: How do you make our business long-term and good relationship ?
A: 1.We keep good quality and competitive price to ensure our customers’ benefit.
2.We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.


  • Previous:
  • Next: