Good Quality Extrusion Aluminum Rod - 3000 Series Solid Aluminum Round Rod – Rizhaoxin Detail:
Product Description
3003 is an AL-Mn alloy, which is a widely used anti-rust aluminum. The strength of this alloy is not high and cannot be strengthened by heat treatment. Therefore, cold working method is used to improve its mechanical properties: it has high plasticity in the annealed state. , In the semi-cold work hardening, the plasticity is still good, and the cold work hardening is low in plasticity, good corrosion resistance, good weldability, and poor machinability. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gas medium, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: Wire is used to make rivets.
The corrosion resistance of 3003 aluminum alloy is very good, close to the corrosion resistance of industrial pure aluminum, and has good corrosion resistance to atmosphere, fresh water, seawater, food, organic acid, gasoline, neutral inorganic salt solution, etc. The corrosion resistance is also very good.
3A21 aluminum rod belongs to both hard aluminum alloy and wrought aluminum alloy in terms of composition. Compared with 23A21, due to the higher copper content, the strength is higher and the thermal strength is better, but the plasticity in the hot state is not as good as that of 3A21. , 3A21 aluminum alloy has good machinability, good contact welding, spot welding and rolling welding performance, arc welding and gas welding poor performance; heat treatment can be strengthened, there is extrusion effect.
3003 aluminum rod chemical composition and mechanical properties
Al |
Si |
Cu |
Mg |
Zn |
Mn |
Ti |
Ni |
Fe+Ni |
Fe |
余量 |
≤0.60 |
0.05-0.20 |
— |
≤0.10 |
1.00-1.50 |
— |
— |
— |
≤0.70 |
TensileStrength(Mpa) | 140-180 |
yield strength(Mpa) | ≥115 |
EL(%) | ≤2% |
Density(g/cm³) | 2.75 |
Chemical composition and mechanical properties of 3A21 aluminum rod
Al |
Si |
Cu |
Mg |
Zn |
Mn |
Ti |
Ni |
Ti+Zr |
Fe |
margin |
≤0.60 |
≤0.20 |
≤0.50 |
≤0.10 |
1.00-1.60 |
≤0.15 |
— |
≤0.20 |
≤0.70 |
TensileStrength(Mpa) |
140-180 |
yield strength(Mpa) |
≥115 |
EL(%) |
≤2% |
Density(g/cm³) |
2.75 |
Product detail pictures:
Related Product Guide:
We have been ready to share our knowledge of advertising and marketing worldwide and recommend you suitable products and solutions at most competitive price ranges. So Profi Tools supply you best benefit of money and we're ready to create with each other with Good Quality Extrusion Aluminum Rod - 3000 Series Solid Aluminum Round Rod – Rizhaoxin, The product will supply to all over the world, such as: San Diego, Mecca, Zambia, Ensuring high product quality by choosing the best suppliers, we have also implemented comprehensive quality control processes throughout our sourcing procedures. Meanwhile, our access to a large range of factories, coupled with our excellent management, also ensures that we can quickly fill your requirements at the best prices, regardless the order size.
By Eileen from Adelaide - 2017.01.28 19:59
Good quality, reasonable prices, rich variety and perfect after-sales service, it's nice!
By Claire from Albania - 2018.06.18 19:26