ASTM A830-1045 High-carbon Steel Plates

Short Description:

ASTM A830-1045 High-carbon Steel Plate is a kind of alloy steel palte.


$560.00 – $690.00 / Ton

5 Ton (Min. Order)

Product Detail

Product Tags

ASTM A830-1045 High-carbon Steel Plate is a kind of alloy steel sheet. After proper heat treatment or cold drawing hardening, high carbon steel has high strength and hardness, high elastic limit and fatigue limit, and the cutting performance is acceptable, but the welding performance and cold plastic deformation ability are poor. Due to the high carbon content, cracks are prone to occur during water quenching, so double-liquid quenching is mostly used, and oil quenching is mostly used for small-section parts. This type of steel is generally tempered or normalized at medium temperature after quenching or used in a surface quenched state. Mainly used in the manufacture of springs and wear-resistant parts. Carbon tool steel is a high carbon steel that basically does not add alloying elements, and it is also a steel with low cost, good cold and hot workability, and a wide range of use among tool steels. Its carbon content is 0.65 to 1.35%, and it is a steel specially used for making tools. 

Steel Pipe Coil Plate Sheet Tube


Product Name ASTM A830-1045 High-carbon Steel Plate Sheet
Standard ASTM A830-1045
Material GB:45#ASTM:AiSi 1045JIS:S45CDIN:C45E/Ck45
Technology Hot Rolled ,Cold Rolled,Cold Drawn,Hot Expended
Tolerance Control with in the standard, OD:+/-1%, WT:+/-5%
Chemical Composition  C:0.43-0.5%Mn:0.6-0.9%P:≤0.04%



Mechanical Property Yield Strength (MPa):450Tensile  Strength (MPa):585Elongation %:12%
Application Widely used in marine components, building steel structure components, substation auxiliary facilities, light industry, etc. 
Payment Terms 1.FOB 30%T/T,70% Before shipment
2.CIF 30% Pre-payment , Balance must be paid before  shipment
 3.Irrevocable 100% L/C at sight
Third Party Inspection SGS ,BV, MTC
Advantages 1.Short delivery time2.Quality assurance3.Competitive price,4.Free Sample
Delivery Time Within 25 days after receipt of advance payment


Seamless Steel Pipe Coil Plate Sheet Tube

The steel plate is a flat steel that is cast with molten steel and pressed after cooling.
The steel sheet is flat, rectangular and can be directly rolled or cut from wide steel strips.
The steel plates is divided according to the thickness, the thin steel plate is less than 4 mm (the thinnest is 0.2 mm), the medium-thick steel plate is 4-60 mm, and the extra-thick steel plate is 60-115 mm.
Steel sheets are divided into hot rolling plate and cold rolling plate according to rolling.


Carbon Steel Plate

Galvanized Steel Pipe Coil Plate Sheet Tube

1. Hot Rolled Steel Plate
Hot rolling processing methods include hot rolling, forging, extrusion and other methods.
2. Cold Rolled Steel Plate
Cold rolling processing methods include cold rolling, cold drawing and cold drawing, cold bending, cold extrusion and other methods.
The cold rolling method is to continue processing the hot rolled steel below the recrystallization temperature to make it cold rolled steel. Using cold rolling processing method can improve the mechanical properties of steel, and obtain products with high dimensional accuracy and certain smoothness.

Steel Pipes Coils Plates Sheets Tubes


Carbon Steel Sheet

Steel Pipe Coil Plate Sheet Tubing

Hot Rolled Carbon Steel Sheet

Hot Rolled Carbon Steel Plate


Steel Seamless Pipe Coil Plate Sheet Tube
Q: Are you a manufacturer?
A: Yes , we are a Carbon Steel Sheet manufacturer, We have own factory, which is located in Shandong,China. We have a leading power in producing and exporting carbon steel plate,cold rolled steel sheet, etc. We promise that we are what you are looking for. 
Q:Can we visit your factory ?
A:Warmly welcome once we have your schedule we will pick you up .
Q: Do you have quality control?
A: Yes, we can accept BV, SGS third inspection .
Q: Can you arrange the shipment?
A: Sure, we have permanent freight forwarder who can gain the best price from most ship company and offer professional service.
Q: How long is your delivery time?
A: Generally it is 7-14 days if the goods are in stock. or it is 25-35 days if the goods are not in stock, it is according to quantity.
Q:How can we get the offer?
A:Please offer the specification of the product,such as material,size,shape,etc.So we can give the best offer.
Q:Can we get the some samples?Any charges?
A:Yes,you can get available samples in our stock.Free for real samples,but customers need to pay the freight cost.
Q: How do you make our business long-term and good relationship ?
A: 1.We keep good quality and competitive price to ensure our customers’ benefit.
2.We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

  • Previous:
  • Next: