High Quality Solid Aluminum Rod - 3000 Series Solid Aluminum Round Rod – Rizhaoxin Detail:
Product Description
3003 is an AL-Mn alloy, which is a widely used anti-rust aluminum. The strength of this alloy is not high and cannot be strengthened by heat treatment. Therefore, cold working method is used to improve its mechanical properties: it has high plasticity in the annealed state. , In the semi-cold work hardening, the plasticity is still good, and the cold work hardening is low in plasticity, good corrosion resistance, good weldability, and poor machinability. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gas medium, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: Wire is used to make rivets.
The corrosion resistance of 3003 aluminum alloy is very good, close to the corrosion resistance of industrial pure aluminum, and has good corrosion resistance to atmosphere, fresh water, seawater, food, organic acid, gasoline, neutral inorganic salt solution, etc. The corrosion resistance is also very good.
3A21 aluminum rod belongs to both hard aluminum alloy and wrought aluminum alloy in terms of composition. Compared with 23A21, due to the higher copper content, the strength is higher and the thermal strength is better, but the plasticity in the hot state is not as good as that of 3A21. , 3A21 aluminum alloy has good machinability, good contact welding, spot welding and rolling welding performance, arc welding and gas welding poor performance; heat treatment can be strengthened, there is extrusion effect.
3003 aluminum rod chemical composition and mechanical properties
Al |
Si |
Cu |
Mg |
Zn |
Mn |
Ti |
Ni |
Fe+Ni |
Fe |
余量 |
≤0.60 |
0.05-0.20 |
— |
≤0.10 |
1.00-1.50 |
— |
— |
— |
≤0.70 |
TensileStrength(Mpa) | 140-180 |
yield strength(Mpa) | ≥115 |
EL(%) | ≤2% |
Density(g/cm³) | 2.75 |
Chemical composition and mechanical properties of 3A21 aluminum rod
Al |
Si |
Cu |
Mg |
Zn |
Mn |
Ti |
Ni |
Ti+Zr |
Fe |
margin |
≤0.60 |
≤0.20 |
≤0.50 |
≤0.10 |
1.00-1.60 |
≤0.15 |
— |
≤0.20 |
≤0.70 |
TensileStrength(Mpa) |
140-180 |
yield strength(Mpa) |
≥115 |
EL(%) |
≤2% |
Density(g/cm³) |
2.75 |
Product detail pictures:
Related Product Guide:
To create more value for customers is our business philosophy; customer growing is our working chase for High Quality Solid Aluminum Rod - 3000 Series Solid Aluminum Round Rod – Rizhaoxin, The product will supply to all over the world, such as: Belgium, Kuala Lumpur, Costa rica, Our organization. Situated inside the national civilized cities, the visitors is very easy, unique geographical and economic situations. We pursue a "people-oriented, meticulous manufacturing, brainstorm, construct brilliant" organization. hilosophy. Strict top quality management, fantastic service, reasonable cost in Myanmar is our stand on the premise of competition. If vital, welcome to make contact with us by our web page or telephone consultation, we are going to be pleased to serve you.
By Dee Lopez from Singapore - 2018.10.09 19:07
The company leader recept us warmly, through a meticulous and thorough discussion, we signed a purchase order. Hope to cooperate smoothly
By Debby from Denmark - 2018.09.23 17:37