Professional China 7075 T6 Aluminum Tube - 3000 Series Aluminum Tube Aluminum Pipe – Rizhaoxin Detail:
Product Description
3003 aluminum alloy is used for making components of high corrosion resistance and good welding performanceincluding kitchen utensils food storage container, chemical processing devicechemical storage container, liquid transfer tank,pressure vessels,pipelines,etc.It is used to process parts with good formability, high corrosion resistance and good weldability, or work with these properties and higher strength than 1xxx alloy, such as kitchen utensils, food and chemical products processing and storage devices, tanks and tanks for transporting liquid products, various pressure vessels and pipes processed with thin plates, general utensils, heat sinks, cosmetic plates, etc Photocopier cylinder, ship material.
3A21 aluminum alloy is used for making aircraft fuel tank. oil duct aluminum rivet.construction materialsfood equipmentetc,etc.As an Al Mn alloy, it is the most widely used antirust aluminum with low strength (only slightly higher than industrial pure aluminum) and cannot be heat treated and strengthened. Therefore, cold processing is often used to improve its mechanical properties; It has high plasticity in annealing state, and is good in semi cold hardening, low plasticity, good corrosion resistance, good weldability and poor cutting performance.
3004 aluminum alloy can be widely used in color coated aluminum substrate, shutter material, decorating, packaging, printing, construction, transportation and electronics industries.3004 is an AL-Mn alloy, which is the most widely used anti-rust aluminum. The strength of this alloy is not high (slightly higher than that of industrial pure aluminum) and cannot be strengthened by heat treatment. Therefore, cold working methods are used to improve its mechanical properties: It has high plasticity in the annealed state, good plasticity in semi-cold work hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability and poor machinability. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gas media, such as mailboxes, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: Wire is used to make rivets.
Component
|
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Others |
Al |
|
|
single |
total |
|||||||||
|
0.6 |
0.7 |
0.05~0.2 |
1.0`1.5 |
— |
— |
0.1 |
— |
0.05 |
0.15 |
all rest part |
|
0.6 |
0.7 |
0.2 |
1.0~1.6 |
0.05 |
— |
0.1 |
0.15 |
0.05 |
0.1 |
all rest part |
|
0.3 |
0.7 |
0.25 |
1.0~1.5 |
0.8~1.3 |
— |
0.25 |
— |
0.05 |
0.15 |
all rest part |
Product detail pictures:
Related Product Guide:
We can normally fulfill our respected consumers with our great excellent, great value and good provider due to we're much more specialist and extra hard-working and do it in cost-effective way for Professional China 7075 T6 Aluminum Tube - 3000 Series Aluminum Tube Aluminum Pipe – Rizhaoxin, The product will supply to all over the world, such as: Guatemala, Swansea, Liverpool, The company has perfect management system and after-sales service system. We devote ourselves to building a pioneer in the filter industry. Our factory is willing to cooperate with different customers domestic and overseas to gain better and better future.
By Meredith from Czech - 2018.09.16 11:31
Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!
By Jack from Lithuania - 2017.12.02 14:11